Best tone and probe kit for cable tracing
The verdict
Tempo or Klein for dead cable, Pro3000F60 near electrical noise, IntelliTone Pro 200 on live networks.
At a glance
- New
- from $87.08
- Used / refurb
- none seen
- Rent / week
- none seen
- New
- from $99.98
- Used / refurb
- none seen
- Rent / week
- none seen
- New
- from $203.72
- Used / refurb
- none seen
- Rent / week
- none seen
- New
- from $328.99
- Used / refurb
- none seen
- Rent / week
- none seen
Specs and prices side by side
| Prices | ||||
| New | $87.08 – $98.09 | $99.98 | $203.72 – $244.23 | $328.99 – $359.92 |
| Where they differ | ||||
| Kit | 77HP-G tone generator + 200EP-G probe | – | – | – |
| Tone | 890/960 Hz alternating; warble 1.3 / 6 Hz | – | – | – |
| Output | +10 dBm into 600 Ω | – | 8 dBm into 600 Ω | – |
| Protection | 150 VDC | – | 60 Vdc | – |
| Probe gain | 30 dB | – | – | – |
| Battery | 9 V each; probe >50 h | Toner 120 h, probe 25 h (AAA) | 9 V alkaline (each unit) | 9 V, 20 h typical |
| Tones | – | 800, 1000, 1500 Hz constant; 800/1000 and 1000/1500 Hz alternating | 1000 Hz solid; 1000/1500 Hz alternating; SmartTone (5 cadences) | – |
| Use | – | Non-energized wiring only | – | – |
| Tests | – | Continuity and polarity | – | Continuity / CableMap (opens, shorts, reversed pairs) |
| Weight | – | Toner 210 g, probe 161.6 g (with batteries) | – | – |
| Range | – | – | Up to 16 km (10 mi) on most cables | – |
| Probe filter | – | – | Blocks 60 Hz and harmonics (switchable) | – |
| Toning | – | – | – | IntelliTone digital + SmartTone analog (500–1200 Hz) |
| Ports | – | – | – | RJ45 (Mod8), F connector, banana jacks |
| Applications | – | – | – | UTP/STP, 50/75 Ω coax, 10/100/1000BASE-T networks |
| Spec source | Manufacturer datasheet | Manufacturer product page and manual | Manufacturer datasheet | Manufacturer datasheet |
Highlighted rows differ between models. Green = lowest US-dollar price. Other currencies are shown as listed, not converted. Specs: manufacturer datasheets and product pages (linked per model); – = not published by the manufacturer.
The details
Short answer: for dead (non-energized) cable, an analog kit does the job. The Tempo 701K-G ($87.08+) and Klein VDV500-820 ($99.98+) are the budget picks. The Fluke Pro3000F60 ($203.72+) adds a filtered probe that blocks 60 Hz hum near power and lighting. To trace cable on a live switch, you need digital toning like the Fluke IntelliTone Pro 200 ($328.99+).
Klein says its Toner-Pro is for non-energized wiring only. Fluke lists the IntelliTone for 10/100/1000BASE-T networks. If you also need wiremap and length, a verifier such as the Klein Scout Pro 3 or MicroScanner PoE has a built-in tone generator. See network and cable testers.
Sources
Every price we found · 13 listings with seller, date and link
Every toner price we found
Prices in the seller's currency, not converted. "Seen" is the date we read the price on the source page. Full price table.
FAQ
What is the best tone and probe kit?
Can you tone a cable connected to a live switch?
What does a filtered probe do?
Related comparisons
Weekly gear-deals email
Used DSX, OTDR and splicer deals, price drops and rental rates, one short email every week. Free.
Opens our beehiiv signup page. No spam. Unsubscribe anytime.
